@tags{Audio} More...

#include <juce_AudioCDBurner.h>

Inheritance diagram for juce::AudioCDBurner:

Collaboration diagram for juce::AudioCDBurner:

[legend]

Classes
class	BurnProgressListener
	Receives progress callbacks during a cd-burn operation. More...

Public Types
enum	DiskState { unknown, trayOpen, noDisc, writableDiskPresent, readOnlyDiskPresent }

Public Member Functions
	~AudioCDBurner ()
	Destructor. More...

void	abortBurn ()
	If a burn operation is currently in progress, this tells it to stop as soon as possible. More...

bool	addAudioTrack (AudioSource *source, int numSamples)
	Adds a track to be written. More...

void	addChangeListener (ChangeListener *listener)
	Registers a listener to receive change callbacks from this broadcaster. More...

String	burn (BurnProgressListener *listener, bool ejectDiscAfterwards, bool performFakeBurnForTesting, int writeSpeed)
	Runs the burn process. More...

void	dispatchPendingMessages ()
	If a change message has been sent but not yet dispatched, this will call sendSynchronousChangeMessage() to make the callback immediately. More...

Array< int >	getAvailableWriteSpeeds () const
	Returns the set of possible write speeds that the device can handle. More...

DiskState	getDiskState () const
	Returns the current status of the device. More...

int	getNumAvailableAudioBlocks () const
	Returns the number of free blocks on the disk. More...

bool	isDiskPresent () const
	Returns true if there's a writable disk in the drive. More...

bool	openTray ()
	Sends an eject signal to the drive. More...

void	removeAllChangeListeners ()
	Removes all listeners from the list. More...

void	removeChangeListener (ChangeListener *listener)
	Unregisters a listener from the list. More...

void	sendChangeMessage ()
	Causes an asynchronous change message to be sent to all the registered listeners. More...

void	sendSynchronousChangeMessage ()
	Sends a synchronous change message to all the registered listeners. More...

bool	setBufferUnderrunProtection (bool shouldBeEnabled)
	Tries to enable or disable buffer underrun safety on devices that support it. More...

DiskState	waitUntilStateChange (int timeOutMilliseconds)
	Blocks the current thread until the drive's state changes, or until the timeout expires. More...

Static Public Member Functions
static StringArray	findAvailableDevices ()
	Returns a list of available optical drives. More...

static AudioCDBurner *	openDevice (const int deviceIndex)
	Tries to open one of the optical drives. More...

Private Member Functions
	AudioCDBurner (const int deviceIndex)

void	callListeners ()

Private Attributes
std::atomic< bool >	anyListeners { false }

ChangeBroadcasterCallback	broadcastCallback

ListenerList< ChangeListener >	changeListeners

std::unique_ptr< Pimpl >	pimpl

Detailed Description

@tags{Audio}

Member Enumeration Documentation

◆ DiskState

enum juce::AudioCDBurner::DiskState

Enumerator
unknown	An error condition, if the device isn't responding.
trayOpen	The drive is currently open. Note that a slot-loading drive may seem to be permanently open.
noDisc	The drive has no disk in it.
writableDiskPresent	The drive contains a writeable disk.
readOnlyDiskPresent	The drive contains a read-only disk.

Constructor & Destructor Documentation

◆ ~AudioCDBurner()

juce::AudioCDBurner::~AudioCDBurner ( )

Destructor.

◆ AudioCDBurner()

juce::AudioCDBurner::AudioCDBurner ( const int deviceIndex )

private

Member Function Documentation

◆ abortBurn()

void juce::AudioCDBurner::abortBurn ( )

If a burn operation is currently in progress, this tells it to stop as soon as possible.

It's also possible to stop the burn process by returning true from BurnProgressListener::audioCDBurnProgress()

◆ addAudioTrack()

bool juce::AudioCDBurner::addAudioTrack	(	AudioSource *	source,
		int	numSamples
	)

Adds a track to be written.

The source passed-in here will be kept by this object, and it will be used and deleted at some point in the future, either during the burn() method or when this AudioCDBurner object is deleted. Your caller method shouldn't keep a reference to it or use it again after passing it in here.

◆ addChangeListener()

void juce::ChangeBroadcaster::addChangeListener ( ChangeListener * listener )

inherited

Registers a listener to receive change callbacks from this broadcaster.

Trying to add a listener that's already on the list will have no effect.

◆ burn()

String juce::AudioCDBurner::burn	(	BurnProgressListener *	listener,
		bool	ejectDiscAfterwards,
		bool	performFakeBurnForTesting,
		int	writeSpeed
	)

Runs the burn process.

This method will block until the operation is complete.

Parameters

listener	the object to receive callbacks about progress
ejectDiscAfterwards	whether to eject the disk after the burn completes
performFakeBurnForTesting	if true, no data will actually be written to the disk
writeSpeed	one of the write speeds from getAvailableWriteSpeeds(), or 0 or less to mean the fastest speed.

◆ callListeners()

void juce::ChangeBroadcaster::callListeners ( )

privateinherited

◆ dispatchPendingMessages()

void juce::ChangeBroadcaster::dispatchPendingMessages ( )

inherited

If a change message has been sent but not yet dispatched, this will call sendSynchronousChangeMessage() to make the callback immediately.

For thread-safety reasons, you must only call this method on the main message thread.

◆ findAvailableDevices()

static StringArray juce::AudioCDBurner::findAvailableDevices ( )

static

Returns a list of available optical drives.

Use openDevice() to open one of the items from this list.

◆ getAvailableWriteSpeeds()

Array<int> juce::AudioCDBurner::getAvailableWriteSpeeds ( ) const

Returns the set of possible write speeds that the device can handle.

These are as a multiple of 'normal' speed, so e.g. '24x' returns 24, etc. Note that if there's no media present in the drive, this value may be unavailable!

See also: setWriteSpeed, getWriteSpeed

◆ getDiskState()

DiskState juce::AudioCDBurner::getDiskState ( ) const

Returns the current status of the device.

To get informed when the drive's status changes, attach a ChangeListener to the AudioCDBurner.

◆ getNumAvailableAudioBlocks()

int juce::AudioCDBurner::getNumAvailableAudioBlocks ( ) const

Returns the number of free blocks on the disk.

There are 75 blocks per second, at 44100Hz.

◆ isDiskPresent()

bool juce::AudioCDBurner::isDiskPresent ( ) const

Returns true if there's a writable disk in the drive.

◆ openDevice()

static AudioCDBurner* juce::AudioCDBurner::openDevice ( const int deviceIndex )

static

Tries to open one of the optical drives.

The deviceIndex is an index into the array returned by findAvailableDevices().

◆ openTray()

bool juce::AudioCDBurner::openTray ( )

Sends an eject signal to the drive.

The eject will happen asynchronously, so you can use getDiskState() and waitUntilStateChange() to monitor its progress.

◆ removeAllChangeListeners()

void juce::ChangeBroadcaster::removeAllChangeListeners ( )

inherited

Removes all listeners from the list.

◆ removeChangeListener()

void juce::ChangeBroadcaster::removeChangeListener ( ChangeListener * listener )

inherited

Unregisters a listener from the list.

If the listener isn't on the list, this won't have any effect.

◆ sendChangeMessage()

void juce::ChangeBroadcaster::sendChangeMessage ( )

inherited

Causes an asynchronous change message to be sent to all the registered listeners.

The message will be delivered asynchronously by the main message thread, so this method will return immediately. To call the listeners synchronously use sendSynchronousChangeMessage().

Referenced by juce::SelectedItemSet< SelectableItemType >::changed().

◆ sendSynchronousChangeMessage()

void juce::ChangeBroadcaster::sendSynchronousChangeMessage ( )

inherited

Sends a synchronous change message to all the registered listeners.

This will immediately call all the listeners that are registered. For thread-safety reasons, you must only call this method on the main message thread.

See also: dispatchPendingMessages

Referenced by juce::SelectedItemSet< SelectableItemType >::changed().

◆ setBufferUnderrunProtection()

bool juce::AudioCDBurner::setBufferUnderrunProtection ( bool shouldBeEnabled )

Tries to enable or disable buffer underrun safety on devices that support it.

Returns: true if it's now enabled. If the device doesn't support it, this will always return false.

◆ waitUntilStateChange()

DiskState juce::AudioCDBurner::waitUntilStateChange ( int timeOutMilliseconds )

Blocks the current thread until the drive's state changes, or until the timeout expires.

Returns: the device's new state

Member Data Documentation

◆ anyListeners

std::atomic<bool> juce::ChangeBroadcaster::anyListeners { false }

privateinherited

◆ broadcastCallback

ChangeBroadcasterCallback juce::ChangeBroadcaster::broadcastCallback

privateinherited

◆ changeListeners

ListenerList<ChangeListener> juce::ChangeBroadcaster::changeListeners

privateinherited

◆ pimpl

std::unique_ptr<Pimpl> juce::AudioCDBurner::pimpl

private

The documentation for this class was generated from the following file:

juce_AudioCDBurner.h

Classes

Public Types

Public Member Functions

Static Public Member Functions

Private Member Functions

Private Attributes

Detailed Description

Member Enumeration Documentation

◆ DiskState

Constructor & Destructor Documentation

◆ ~AudioCDBurner()

◆ AudioCDBurner()

Member Function Documentation

◆ abortBurn()

◆ addAudioTrack()

◆ addChangeListener()

◆ burn()

◆ callListeners()

◆ dispatchPendingMessages()

◆ findAvailableDevices()

◆ getAvailableWriteSpeeds()

◆ getDiskState()

◆ getNumAvailableAudioBlocks()

◆ isDiskPresent()

◆ openDevice()

◆ openTray()

◆ removeAllChangeListeners()

◆ removeChangeListener()

◆ sendChangeMessage()

◆ sendSynchronousChangeMessage()

◆ setBufferUnderrunProtection()

◆ waitUntilStateChange()

Member Data Documentation

◆ anyListeners

◆ broadcastCallback

◆ changeListeners

◆ pimpl