Represents an MPE voice that an MPESynthesiser can use to play a sound. More...

#include <juce_MPESynthesiserVoice.h>

Collaboration diagram for juce::MPESynthesiserVoice:

[legend]

Public Member Functions
	MPESynthesiserVoice ()
	Constructor. More...

virtual	~MPESynthesiserVoice ()
	Destructor. More...

MPENote	getCurrentlyPlayingNote () const noexcept
	Returns the MPENote that this voice is currently playing. More...

double	getSampleRate () const noexcept
	Returns the current target sample rate at which rendering is being done. More...

virtual bool	isActive () const
	Returns true if this voice is currently busy playing a sound. More...

bool	isCurrentlyPlayingNote (MPENote note) const noexcept
	Returns true if the voice is currently playing the given MPENote (as identified by the note's initial note number and MIDI channel). More...

bool	isPlayingButReleased () const noexcept
	Returns true if a voice is sounding in its release phase. More...

virtual void	noteKeyStateChanged ()=0
	Called by the MPESynthesiser to let the voice know that its currently playing note has changed its key state. More...

virtual void	notePitchbendChanged ()=0
	Called by the MPESynthesiser to let the voice know that its currently playing note has changed its pitchbend value. More...

virtual void	notePressureChanged ()=0
	Called by the MPESynthesiser to let the voice know that its currently playing note has changed its pressure value. More...

virtual void	noteStarted ()=0
	Called by the MPESynthesiser to let the voice know that a new note has started on it. More...

virtual void	noteStopped (bool allowTailOff)=0
	Called by the MPESynthesiser to let the voice know that its currently playing note has stopped. More...

virtual void	noteTimbreChanged ()=0
	Called by the MPESynthesiser to let the voice know that its currently playing note has changed its timbre value. More...

virtual void	renderNextBlock (AudioBuffer< double > &, int, int)
	Renders the next block of 64-bit data for this voice. More...

virtual void	renderNextBlock (AudioBuffer< float > &outputBuffer, int startSample, int numSamples)=0
	Renders the next block of data for this voice. More...

virtual void	setCurrentSampleRate (double newRate)
	Changes the voice's reference sample rate. More...

Public Attributes
uint32	noteOnTime = 0
	This will be set to an incrementing counter value in MPESynthesiser::startVoice() and can be used to determine the order in which voices started. More...

Protected Member Functions
void	clearCurrentNote () noexcept
	Resets the state of this voice after a sound has finished playing. More...

Protected Attributes
MPENote	currentlyPlayingNote

double	currentSampleRate = 0.0

Friends
class	MPESynthesiser

Detailed Description

Represents an MPE voice that an MPESynthesiser can use to play a sound.

A voice plays a single sound at a time, and a synthesiser holds an array of voices so that it can play polyphonically.

See also: MPESynthesiser, MPENote

@tags{Audio}

Constructor & Destructor Documentation

◆ MPESynthesiserVoice()

juce::MPESynthesiserVoice::MPESynthesiserVoice ( )

Constructor.

◆ ~MPESynthesiserVoice()

virtual juce::MPESynthesiserVoice::~MPESynthesiserVoice ( )

virtual

Destructor.

Member Function Documentation

◆ clearCurrentNote()

void juce::MPESynthesiserVoice::clearCurrentNote ( )

protectednoexcept

Resets the state of this voice after a sound has finished playing.

The subclass must call this when it finishes playing a note and becomes available to play new ones.

It must either call it in the stopNote() method, or if the voice is tailing off, then it should call it later during the renderNextBlock method, as soon as it finishes its tail-off.

It can also be called at any time during the render callback if the sound happens to have finished, e.g. if it's playing a sample and the sample finishes.

◆ getCurrentlyPlayingNote()

MPENote juce::MPESynthesiserVoice::getCurrentlyPlayingNote ( ) const

inlinenoexcept

Returns the MPENote that this voice is currently playing.

Returns an invalid MPENote if no note is playing (you can check this using MPENote::isValid() or MPEVoice::isActive()).

◆ getSampleRate()

double juce::MPESynthesiserVoice::getSampleRate ( ) const

inlinenoexcept

Returns the current target sample rate at which rendering is being done.

Subclasses may need to know this so that they can pitch things correctly.

◆ isActive()

virtual bool juce::MPESynthesiserVoice::isActive ( ) const

inlinevirtual

Returns true if this voice is currently busy playing a sound.

By default this just checks whether getCurrentlyPlayingNote() returns a valid MPE note, but can be overridden for more advanced checking.

◆ isCurrentlyPlayingNote()

bool juce::MPESynthesiserVoice::isCurrentlyPlayingNote ( MPENote note ) const

noexcept

Returns true if the voice is currently playing the given MPENote (as identified by the note's initial note number and MIDI channel).

◆ isPlayingButReleased()

bool juce::MPESynthesiserVoice::isPlayingButReleased ( ) const

noexcept

Returns true if a voice is sounding in its release phase.

◆ noteKeyStateChanged()

virtual void juce::MPESynthesiserVoice::noteKeyStateChanged ( )

pure virtual

Called by the MPESynthesiser to let the voice know that its currently playing note has changed its key state.

This typically happens when a sustain or sostenuto pedal is pressed or released (on an MPE channel relevant for this note), or if the note key is lifted while the sustained or sostenuto pedal is still held down. This will be called during the rendering callback, so must be fast and thread-safe.

◆ notePitchbendChanged()

virtual void juce::MPESynthesiserVoice::notePitchbendChanged ( )

pure virtual

Called by the MPESynthesiser to let the voice know that its currently playing note has changed its pitchbend value.

This will be called during the rendering callback, so must be fast and thread-safe.

Note: You can call currentlyPlayingNote.getFrequencyInHertz() to find out the effective frequency of the note, as a sum of the initial note number, the per-note pitchbend and the master pitchbend.

◆ notePressureChanged()

virtual void juce::MPESynthesiserVoice::notePressureChanged ( )

pure virtual

Called by the MPESynthesiser to let the voice know that its currently playing note has changed its pressure value.

This will be called during the rendering callback, so must be fast and thread-safe.

◆ noteStarted()

virtual void juce::MPESynthesiserVoice::noteStarted ( )

pure virtual

Called by the MPESynthesiser to let the voice know that a new note has started on it.

This will be called during the rendering callback, so must be fast and thread-safe.

◆ noteStopped()

virtual void juce::MPESynthesiserVoice::noteStopped ( bool allowTailOff )

pure virtual

Called by the MPESynthesiser to let the voice know that its currently playing note has stopped.

This will be called during the rendering callback, so must be fast and thread-safe.

If allowTailOff is false or the voice doesn't want to tail-off, then it must stop all sound immediately, and must call clearCurrentNote() to reset the state of this voice and allow the synth to reassign it another sound.

If allowTailOff is true and the voice decides to do a tail-off, then it's allowed to begin fading out its sound, and it can stop playing until it's finished. As soon as it finishes playing (during the rendering callback), it must make sure that it calls clearCurrentNote().

◆ noteTimbreChanged()

virtual void juce::MPESynthesiserVoice::noteTimbreChanged ( )

pure virtual

Called by the MPESynthesiser to let the voice know that its currently playing note has changed its timbre value.

This will be called during the rendering callback, so must be fast and thread-safe.

◆ renderNextBlock() [1/2]

virtual void juce::MPESynthesiserVoice::renderNextBlock	(	AudioBuffer< double > &	,
		int	,
		int
	)

inlinevirtual

Renders the next block of 64-bit data for this voice.

Support for 64-bit audio is optional. You can choose to not override this method if you don't need it (the default implementation simply does nothing).

◆ renderNextBlock() [2/2]

virtual void juce::MPESynthesiserVoice::renderNextBlock	(	AudioBuffer< float > &	outputBuffer,
		int	startSample,
		int	numSamples
	)

pure virtual

Renders the next block of data for this voice.

The output audio data must be added to the current contents of the buffer provided. Only the region of the buffer between startSample and (startSample + numSamples) should be altered by this method.

If the voice is currently silent, it should just return without doing anything.

If the sound that the voice is playing finishes during the course of this rendered block, it must call clearCurrentNote(), to tell the synthesiser that it has finished.

The size of the blocks that are rendered can change each time it is called, and may involve rendering as little as 1 sample at a time. In between rendering callbacks, the voice's methods will be called to tell it about note and controller events.

◆ setCurrentSampleRate()

virtual void juce::MPESynthesiserVoice::setCurrentSampleRate ( double newRate )

inlinevirtual

Changes the voice's reference sample rate.

The rate is set so that subclasses know the output rate and can set their pitch accordingly.

This method is called by the synth, and subclasses can access the current rate with the currentSampleRate member.

Friends And Related Function Documentation

◆ MPESynthesiser

friend class MPESynthesiser

friend

Member Data Documentation

◆ currentlyPlayingNote

MPENote juce::MPESynthesiserVoice::currentlyPlayingNote

protected

◆ currentSampleRate

double juce::MPESynthesiserVoice::currentSampleRate = 0.0

protected

◆ noteOnTime

uint32 juce::MPESynthesiserVoice::noteOnTime = 0

This will be set to an incrementing counter value in MPESynthesiser::startVoice() and can be used to determine the order in which voices started.

The documentation for this class was generated from the following file:

juce_MPESynthesiserVoice.h

Public Member Functions

Public Attributes

Protected Member Functions

Protected Attributes

Friends

Detailed Description

Constructor & Destructor Documentation

◆ MPESynthesiserVoice()

◆ ~MPESynthesiserVoice()

Member Function Documentation

◆ clearCurrentNote()

◆ getCurrentlyPlayingNote()

◆ getSampleRate()

◆ isActive()

◆ isCurrentlyPlayingNote()

◆ isPlayingButReleased()

◆ noteKeyStateChanged()

◆ notePitchbendChanged()

◆ notePressureChanged()

◆ noteStarted()

◆ noteStopped()

◆ noteTimbreChanged()

◆ renderNextBlock() [1/2]

◆ renderNextBlock() [2/2]

◆ setCurrentSampleRate()

Friends And Related Function Documentation

◆ MPESynthesiser

Member Data Documentation

◆ currentlyPlayingNote

◆ currentSampleRate

◆ noteOnTime