A path is a sequence of lines and curves that may either form a closed shape or be open-ended. More...
#include <juce_Path.h>
Classes | |
class | Iterator |
Iterates the lines and curves that a path contains. More... | |
struct | PathBounds |
Public Member Functions | |
Path () | |
Creates an empty path. More... | |
Path (const Path &) | |
Creates a copy of another path. More... | |
Path (Path &&) noexcept | |
Move constructor. More... | |
~Path () | |
Destructor. More... | |
void | addArc (float x, float y, float width, float height, float fromRadians, float toRadians, bool startAsNewSubPath=false) |
Adds an elliptical arc to the current path. More... | |
void | addArrow (Line< float > line, float lineThickness, float arrowheadWidth, float arrowheadLength) |
Adds a line with an arrowhead on the end. More... | |
void | addBubble (Rectangle< float > bodyArea, Rectangle< float > maximumArea, const Point< float > arrowTipPosition, const float cornerSize, const float arrowBaseWidth) |
Adds a speech-bubble shape to the path. More... | |
void | addCentredArc (float centreX, float centreY, float radiusX, float radiusY, float rotationOfEllipse, float fromRadians, float toRadians, bool startAsNewSubPath=false) |
Adds an arc which is centred at a given point, and can have a rotation specified. More... | |
void | addEllipse (float x, float y, float width, float height) |
Adds an ellipse to the path. More... | |
void | addEllipse (Rectangle< float > area) |
Adds an ellipse to the path. More... | |
void | addLineSegment (Line< float > line, float lineThickness) |
Adds a line with a specified thickness. More... | |
void | addPath (const Path &pathToAppend) |
Adds another path to this one. More... | |
void | addPath (const Path &pathToAppend, const AffineTransform &transformToApply) |
Adds another path to this one, transforming it on the way in. More... | |
void | addPieSegment (float x, float y, float width, float height, float fromRadians, float toRadians, float innerCircleProportionalSize) |
Adds a "pie-chart" shape to the path. More... | |
void | addPieSegment (Rectangle< float > segmentBounds, float fromRadians, float toRadians, float innerCircleProportionalSize) |
Adds a "pie-chart" shape to the path. More... | |
void | addPolygon (Point< float > centre, int numberOfSides, float radius, float startAngle=0.0f) |
Adds a polygon shape to the path. More... | |
void | addQuadrilateral (float x1, float y1, float x2, float y2, float x3, float y3, float x4, float y4) |
Adds a quadrilateral to the path. More... | |
void | addRectangle (float x, float y, float width, float height) |
Adds a rectangle to the path. More... | |
template<typename ValueType > | |
void | addRectangle (Rectangle< ValueType > rectangle) |
Adds a rectangle to the path. More... | |
void | addRoundedRectangle (float x, float y, float width, float height, float cornerSize) |
Adds a rectangle with rounded corners to the path. More... | |
void | addRoundedRectangle (float x, float y, float width, float height, float cornerSizeX, float cornerSizeY) |
Adds a rectangle with rounded corners to the path. More... | |
void | addRoundedRectangle (float x, float y, float width, float height, float cornerSizeX, float cornerSizeY, bool curveTopLeft, bool curveTopRight, bool curveBottomLeft, bool curveBottomRight) |
Adds a rectangle with rounded corners to the path. More... | |
template<typename ValueType > | |
void | addRoundedRectangle (Rectangle< ValueType > rectangle, float cornerSize) |
Adds a rectangle with rounded corners to the path. More... | |
template<typename ValueType > | |
void | addRoundedRectangle (Rectangle< ValueType > rectangle, float cornerSizeX, float cornerSizeY) |
Adds a rectangle with rounded corners to the path. More... | |
void | addStar (Point< float > centre, int numberOfPoints, float innerRadius, float outerRadius, float startAngle=0.0f) |
Adds a star shape to the path. More... | |
void | addTriangle (float x1, float y1, float x2, float y2, float x3, float y3) |
Adds a triangle to the path. More... | |
void | addTriangle (Point< float > point1, Point< float > point2, Point< float > point3) |
Adds a triangle to the path. More... | |
void | applyTransform (const AffineTransform &transform) noexcept |
Applies a 2D transform to all the vertices in the path. More... | |
void | clear () noexcept |
Removes all lines and curves, resetting the path completely. More... | |
void | closeSubPath () |
Closes a the current sub-path with a line back to its start-point. More... | |
bool | contains (float x, float y, float tolerance=defaultToleranceForTesting) const |
Checks whether a point lies within the path. More... | |
bool | contains (Point< float > point, float tolerance=defaultToleranceForTesting) const |
Checks whether a point lies within the path. More... | |
Path | createPathWithRoundedCorners (float cornerRadius) const |
Creates a version of this path where all sharp corners have been replaced by curves. More... | |
void | cubicTo (float controlPoint1X, float controlPoint1Y, float controlPoint2X, float controlPoint2Y, float endPointX, float endPointY) |
Adds a cubic bezier curve from the shape's last position to a new position. More... | |
void | cubicTo (Point< float > controlPoint1, Point< float > controlPoint2, Point< float > endPoint) |
Adds a cubic bezier curve from the shape's last position to a new position. More... | |
Rectangle< float > | getBounds () const noexcept |
Returns the smallest rectangle that contains all points within the path. More... | |
Rectangle< float > | getBoundsTransformed (const AffineTransform &transform) const noexcept |
Returns the smallest rectangle that contains all points within the path after it's been transformed with the given transform matrix. More... | |
Line< float > | getClippedLine (Line< float > line, bool keepSectionOutsidePath) const |
Cuts off parts of a line to keep the parts that are either inside or outside this path. More... | |
Point< float > | getCurrentPosition () const |
Returns the last point that was added to the path by one of the drawing methods. More... | |
float | getLength (const AffineTransform &transform=AffineTransform(), float tolerance=defaultToleranceForMeasurement) const |
Returns the length of the path. More... | |
float | getNearestPoint (Point< float > targetPoint, Point< float > &pointOnPath, const AffineTransform &transform=AffineTransform(), float tolerance=defaultToleranceForMeasurement) const |
Finds the point along the path which is nearest to a given position. More... | |
Point< float > | getPointAlongPath (float distanceFromStart, const AffineTransform &transform=AffineTransform(), float tolerance=defaultToleranceForMeasurement) const |
Returns a point that is the specified distance along the path. More... | |
AffineTransform | getTransformToScaleToFit (float x, float y, float width, float height, bool preserveProportions, Justification justificationType=Justification::centred) const |
Returns a transform that can be used to rescale the path to fit into a given space. More... | |
AffineTransform | getTransformToScaleToFit (Rectangle< float > area, bool preserveProportions, Justification justificationType=Justification::centred) const |
Returns a transform that can be used to rescale the path to fit into a given space. More... | |
bool | intersectsLine (Line< float > line, float tolerance=defaultToleranceForTesting) const |
Checks whether a line crosses the path. More... | |
bool | isEmpty () const noexcept |
Returns true if the path doesn't contain any lines or curves. More... | |
bool | isUsingNonZeroWinding () const |
Returns the flag that indicates whether the path should use a non-zero winding rule. More... | |
void | lineTo (float endX, float endY) |
Adds a line from the shape's last position to a new end-point. More... | |
void | lineTo (Point< float > end) |
Adds a line from the shape's last position to a new end-point. More... | |
void | loadPathFromData (const void *data, size_t numberOfBytes) |
Loads a stored path from a block of data. More... | |
void | loadPathFromStream (InputStream &source) |
Loads a stored path from a data stream. More... | |
bool | operator!= (const Path &) const noexcept |
Path & | operator= (const Path &) |
Copies this path from another one. More... | |
Path & | operator= (Path &&) noexcept |
Move assignment operator. More... | |
bool | operator== (const Path &) const noexcept |
void | preallocateSpace (int numExtraCoordsToMakeSpaceFor) |
Preallocates enough space for adding the given number of coordinates to the path. More... | |
void | quadraticTo (float controlPointX, float controlPointY, float endPointX, float endPointY) |
Adds a quadratic bezier curve from the shape's last position to a new position. More... | |
void | quadraticTo (Point< float > controlPoint, Point< float > endPoint) |
Adds a quadratic bezier curve from the shape's last position to a new position. More... | |
void | restoreFromString (StringRef stringVersion) |
Restores this path from a string that was created with the toString() method. More... | |
void | scaleToFit (float x, float y, float width, float height, bool preserveProportions) noexcept |
Rescales this path to make it fit neatly into a given space. More... | |
void | setUsingNonZeroWinding (bool isNonZeroWinding) noexcept |
Changes the winding-rule to be used when filling the path. More... | |
void | startNewSubPath (float startX, float startY) |
Begins a new subpath with a given starting position. More... | |
void | startNewSubPath (Point< float > start) |
Begins a new subpath with a given starting position. More... | |
void | swapWithPath (Path &) noexcept |
Swaps the contents of this path with another one. More... | |
String | toString () const |
Creates a string containing a textual representation of this path. More... | |
void | writePathToStream (OutputStream &destination) const |
Stores the path by writing it out to a stream. More... | |
Static Public Attributes | |
static const float | defaultToleranceForMeasurement |
static const float | defaultToleranceForTesting |
Private Attributes | |
PathBounds | bounds |
Array< float > | data |
bool | useNonZeroWinding = true |
Static Private Attributes | |
static const float | closeSubPathMarker |
static const float | cubicMarker |
static const float | lineMarker |
static const float | moveMarker |
static const float | quadMarker |
Friends | |
class | EdgeTable |
class | Path::Iterator |
class | PathFlatteningIterator |
A path is a sequence of lines and curves that may either form a closed shape or be open-ended.
To use a path, you can create an empty one, then add lines and curves to it to create shapes, then it can be rendered by a Graphics context or used for geometric operations.
e.g.
A path object can actually contain multiple sub-paths, which may themselves be open or closed.
@tags{Graphics}
juce::Path::Path | ( | ) |
Creates an empty path.
juce::Path::Path | ( | const Path & | ) |
Creates a copy of another path.
juce::Path::~Path | ( | ) |
Destructor.
|
noexcept |
Move constructor.
void juce::Path::addArc | ( | float | x, |
float | y, | ||
float | width, | ||
float | height, | ||
float | fromRadians, | ||
float | toRadians, | ||
bool | startAsNewSubPath = false |
||
) |
Adds an elliptical arc to the current path.
Note that when specifying the start and end angles, the curve will be drawn either clockwise or anti-clockwise according to whether the end angle is greater than the start. This means that sometimes you may need to use values greater than 2*Pi for the end angle.
x | the left-hand edge of the rectangle in which the elliptical outline fits |
y | the top edge of the rectangle in which the elliptical outline fits |
width | the width of the rectangle in which the elliptical outline fits |
height | the height of the rectangle in which the elliptical outline fits |
fromRadians | the angle (clockwise) in radians at which to start the arc segment (where 0 is the top-centre of the ellipse) |
toRadians | the angle (clockwise) in radians at which to end the arc segment (where 0 is the top-centre of the ellipse). This angle can be greater than 2*Pi, so for example to draw a curve clockwise from the 9 o'clock position to the 3 o'clock position via 12 o'clock, you'd use 1.5*Pi and 2.5*Pi as the start and finish points. |
startAsNewSubPath | if true, the arc will begin a new subpath from its starting point; if false, it will be added to the current sub-path, continuing from the current position |
void juce::Path::addArrow | ( | Line< float > | line, |
float | lineThickness, | ||
float | arrowheadWidth, | ||
float | arrowheadLength | ||
) |
Adds a line with an arrowhead on the end.
The arrow is added as a new closed sub-path. (Any currently open paths will be left open).
void juce::Path::addBubble | ( | Rectangle< float > | bodyArea, |
Rectangle< float > | maximumArea, | ||
const Point< float > | arrowTipPosition, | ||
const float | cornerSize, | ||
const float | arrowBaseWidth | ||
) |
Adds a speech-bubble shape to the path.
bodyArea | the area of the body of the bubble shape |
maximumArea | an area which encloses the body area and defines the limits within which the arrow tip can be drawn - if the tip lies outside this area, the bubble will be drawn without an arrow |
arrowTipPosition | the location of the tip of the arrow |
cornerSize | the size of the rounded corners |
arrowBaseWidth | the width of the base of the arrow where it joins the main rectangle |
void juce::Path::addCentredArc | ( | float | centreX, |
float | centreY, | ||
float | radiusX, | ||
float | radiusY, | ||
float | rotationOfEllipse, | ||
float | fromRadians, | ||
float | toRadians, | ||
bool | startAsNewSubPath = false |
||
) |
Adds an arc which is centred at a given point, and can have a rotation specified.
Note that when specifying the start and end angles, the curve will be drawn either clockwise or anti-clockwise according to whether the end angle is greater than the start. This means that sometimes you may need to use values greater than 2*Pi for the end angle.
centreX | the centre x of the ellipse |
centreY | the centre y of the ellipse |
radiusX | the horizontal radius of the ellipse |
radiusY | the vertical radius of the ellipse |
rotationOfEllipse | an angle by which the whole ellipse should be rotated about its centre, in radians (clockwise) |
fromRadians | the angle (clockwise) in radians at which to start the arc segment (where 0 is the top-centre of the ellipse) |
toRadians | the angle (clockwise) in radians at which to end the arc segment (where 0 is the top-centre of the ellipse). This angle can be greater than 2*Pi, so for example to draw a curve clockwise from the 9 o'clock position to the 3 o'clock position via 12 o'clock, you'd use 1.5*Pi and 2.5*Pi as the start and finish points. |
startAsNewSubPath | if true, the arc will begin a new subpath from its starting point; if false, it will be added to the current sub-path, continuing from the current position |
Adds an ellipse to the path.
The shape is added as a new sub-path. (Any currently open paths will be left open).
Adds an ellipse to the path.
The shape is added as a new sub-path. (Any currently open paths will be left open).
Adds a line with a specified thickness.
The line is added as a new closed sub-path. (Any currently open paths will be left open).
void juce::Path::addPath | ( | const Path & | pathToAppend | ) |
Adds another path to this one.
The new path is added as a new sub-path. (Any currently open paths in this path will be left open).
pathToAppend | the path to add |
void juce::Path::addPath | ( | const Path & | pathToAppend, |
const AffineTransform & | transformToApply | ||
) |
Adds another path to this one, transforming it on the way in.
The new path is added as a new sub-path, its points being transformed by the given matrix before being added.
pathToAppend | the path to add |
transformToApply | an optional transform to apply to the incoming vertices |
void juce::Path::addPieSegment | ( | float | x, |
float | y, | ||
float | width, | ||
float | height, | ||
float | fromRadians, | ||
float | toRadians, | ||
float | innerCircleProportionalSize | ||
) |
Adds a "pie-chart" shape to the path.
The shape is added as a new sub-path. (Any currently open paths will be left open).
Note that when specifying the start and end angles, the curve will be drawn either clockwise or anti-clockwise according to whether the end angle is greater than the start. This means that sometimes you may need to use values greater than 2*Pi for the end angle.
x | the left-hand edge of the rectangle in which the elliptical outline fits |
y | the top edge of the rectangle in which the elliptical outline fits |
width | the width of the rectangle in which the elliptical outline fits |
height | the height of the rectangle in which the elliptical outline fits |
fromRadians | the angle (clockwise) in radians at which to start the arc segment (where 0 is the top-centre of the ellipse) |
toRadians | the angle (clockwise) in radians at which to end the arc segment (where 0 is the top-centre of the ellipse) |
innerCircleProportionalSize | if this is > 0, then the pie will be drawn as a curved band around a hollow ellipse at its centre, where this value indicates the inner ellipse's size with respect to the outer one. |
void juce::Path::addPieSegment | ( | Rectangle< float > | segmentBounds, |
float | fromRadians, | ||
float | toRadians, | ||
float | innerCircleProportionalSize | ||
) |
Adds a "pie-chart" shape to the path.
The shape is added as a new sub-path. (Any currently open paths will be left open).
Note that when specifying the start and end angles, the curve will be drawn either clockwise or anti-clockwise according to whether the end angle is greater than the start. This means that sometimes you may need to use values greater than 2*Pi for the end angle.
segmentBounds | the outer rectangle in which the elliptical outline fits |
fromRadians | the angle (clockwise) in radians at which to start the arc segment (where 0 is the top-centre of the ellipse) |
toRadians | the angle (clockwise) in radians at which to end the arc segment (where 0 is the top-centre of the ellipse) |
innerCircleProportionalSize | if this is > 0, then the pie will be drawn as a curved band around a hollow ellipse at its centre, where this value indicates the inner ellipse's size with respect to the outer one. |
void juce::Path::addPolygon | ( | Point< float > | centre, |
int | numberOfSides, | ||
float | radius, | ||
float | startAngle = 0.0f |
||
) |
Adds a polygon shape to the path.
void juce::Path::addQuadrilateral | ( | float | x1, |
float | y1, | ||
float | x2, | ||
float | y2, | ||
float | x3, | ||
float | y3, | ||
float | x4, | ||
float | y4 | ||
) |
Adds a quadrilateral to the path.
The quad is added as a new closed sub-path. (Any currently open paths will be left open).
Note that whether the vertices are specified in clockwise or anticlockwise order will affect how the quad is filled when it overlaps other shapes (the winding order setting will affect this of course).
Adds a rectangle to the path.
The rectangle is added as a new sub-path. (Any currently open paths will be left open).
|
inline |
Adds a rectangle to the path.
The rectangle is added as a new sub-path. (Any currently open paths will be left open).
void juce::Path::addRoundedRectangle | ( | float | x, |
float | y, | ||
float | width, | ||
float | height, | ||
float | cornerSize | ||
) |
Adds a rectangle with rounded corners to the path.
The rectangle is added as a new sub-path. (Any currently open paths will be left open).
void juce::Path::addRoundedRectangle | ( | float | x, |
float | y, | ||
float | width, | ||
float | height, | ||
float | cornerSizeX, | ||
float | cornerSizeY | ||
) |
Adds a rectangle with rounded corners to the path.
The rectangle is added as a new sub-path. (Any currently open paths will be left open).
void juce::Path::addRoundedRectangle | ( | float | x, |
float | y, | ||
float | width, | ||
float | height, | ||
float | cornerSizeX, | ||
float | cornerSizeY, | ||
bool | curveTopLeft, | ||
bool | curveTopRight, | ||
bool | curveBottomLeft, | ||
bool | curveBottomRight | ||
) |
Adds a rectangle with rounded corners to the path.
The rectangle is added as a new sub-path. (Any currently open paths will be left open).
|
inline |
Adds a rectangle with rounded corners to the path.
The rectangle is added as a new sub-path. (Any currently open paths will be left open).
|
inline |
Adds a rectangle with rounded corners to the path.
The rectangle is added as a new sub-path. (Any currently open paths will be left open).
References juce::Rectangle< ValueType >::getHeight(), juce::Rectangle< ValueType >::getWidth(), juce::Rectangle< ValueType >::getX(), and juce::Rectangle< ValueType >::getY().
void juce::Path::addStar | ( | Point< float > | centre, |
int | numberOfPoints, | ||
float | innerRadius, | ||
float | outerRadius, | ||
float | startAngle = 0.0f |
||
) |
Adds a star shape to the path.
Adds a triangle to the path.
The triangle is added as a new closed sub-path. (Any currently open paths will be left open).
Note that whether the vertices are specified in clockwise or anticlockwise order will affect how the triangle is filled when it overlaps other shapes (the winding order setting will affect this of course).
void juce::Path::addTriangle | ( | Point< float > | point1, |
Point< float > | point2, | ||
Point< float > | point3 | ||
) |
Adds a triangle to the path.
The triangle is added as a new closed sub-path. (Any currently open paths will be left open).
Note that whether the vertices are specified in clockwise or anticlockwise order will affect how the triangle is filled when it overlaps other shapes (the winding order setting will affect this of course).
|
noexcept |
Applies a 2D transform to all the vertices in the path.
|
noexcept |
Removes all lines and curves, resetting the path completely.
void juce::Path::closeSubPath | ( | ) |
Closes a the current sub-path with a line back to its start-point.
When creating a closed shape such as a triangle, don't use 3 lineTo() calls - instead use two lineTo() calls, followed by a closeSubPath() to join the final point back to the start.
This ensures that closes shapes are recognised as such, and this is important for tasks like drawing strokes, which needs to know whether to draw end-caps or not.
bool juce::Path::contains | ( | float | x, |
float | y, | ||
float | tolerance = defaultToleranceForTesting |
||
) | const |
Checks whether a point lies within the path.
This is only relevant for closed paths (see closeSubPath()), and may produce false results if used on a path which has open sub-paths.
The path's winding rule is taken into account by this method.
The tolerance parameter is the maximum error allowed when flattening the path, so this method could return a false positive when your point is up to this distance outside the path's boundary.
bool juce::Path::contains | ( | Point< float > | point, |
float | tolerance = defaultToleranceForTesting |
||
) | const |
Checks whether a point lies within the path.
This is only relevant for closed paths (see closeSubPath()), and may produce false results if used on a path which has open sub-paths.
The path's winding rule is taken into account by this method.
The tolerance parameter is the maximum error allowed when flattening the path, so this method could return a false positive when your point is up to this distance outside the path's boundary.
Creates a version of this path where all sharp corners have been replaced by curves.
Wherever two lines meet at an angle, this will replace the corner with a curve of the given radius.
void juce::Path::cubicTo | ( | float | controlPoint1X, |
float | controlPoint1Y, | ||
float | controlPoint2X, | ||
float | controlPoint2Y, | ||
float | endPointX, | ||
float | endPointY | ||
) |
Adds a cubic bezier curve from the shape's last position to a new position.
This will connect the end-point of the last line or curve that was added to a new point, using a cubic spline with two control-points.
See the class description for an example of how to add lines and curves to a path.
void juce::Path::cubicTo | ( | Point< float > | controlPoint1, |
Point< float > | controlPoint2, | ||
Point< float > | endPoint | ||
) |
Adds a cubic bezier curve from the shape's last position to a new position.
This will connect the end-point of the last line or curve that was added to a new point, using a cubic spline with two control-points.
See the class description for an example of how to add lines and curves to a path.
Returns the smallest rectangle that contains all points within the path.
|
noexcept |
Returns the smallest rectangle that contains all points within the path after it's been transformed with the given transform matrix.
Cuts off parts of a line to keep the parts that are either inside or outside this path.
Note that this isn't smart enough to cope with situations where the line would need to be cut into multiple pieces to correctly clip against a re-entrant shape.
line | the line to clip |
keepSectionOutsidePath | if true, it's the section outside the path that will be kept; if false its the section inside the path |
Returns the last point that was added to the path by one of the drawing methods.
float juce::Path::getLength | ( | const AffineTransform & | transform = AffineTransform() , |
float | tolerance = defaultToleranceForMeasurement |
||
) | const |
Returns the length of the path.
float juce::Path::getNearestPoint | ( | Point< float > | targetPoint, |
Point< float > & | pointOnPath, | ||
const AffineTransform & | transform = AffineTransform() , |
||
float | tolerance = defaultToleranceForMeasurement |
||
) | const |
Finds the point along the path which is nearest to a given position.
This sets pointOnPath to the nearest point, and returns the distance of this point from the start of the path.
Point<float> juce::Path::getPointAlongPath | ( | float | distanceFromStart, |
const AffineTransform & | transform = AffineTransform() , |
||
float | tolerance = defaultToleranceForMeasurement |
||
) | const |
Returns a point that is the specified distance along the path.
If the distance is greater than the total length of the path, this will return the end point.
AffineTransform juce::Path::getTransformToScaleToFit | ( | float | x, |
float | y, | ||
float | width, | ||
float | height, | ||
bool | preserveProportions, | ||
Justification | justificationType = Justification::centred |
||
) | const |
Returns a transform that can be used to rescale the path to fit into a given space.
x | the x position of the rectangle to fit the path inside |
y | the y position of the rectangle to fit the path inside |
width | the width of the rectangle to fit the path inside |
height | the height of the rectangle to fit the path inside |
preserveProportions | if true, it will fit the path into the space without altering its horizontal/vertical scale ratio; if false, it will distort the path to fill the specified ratio both horizontally and vertically |
justificationType | if the proportions are preserved, the resultant path may be smaller than the available rectangle, so this describes how it should be positioned within the space. |
AffineTransform juce::Path::getTransformToScaleToFit | ( | Rectangle< float > | area, |
bool | preserveProportions, | ||
Justification | justificationType = Justification::centred |
||
) | const |
Returns a transform that can be used to rescale the path to fit into a given space.
area | the rectangle to fit the path inside |
preserveProportions | if true, it will fit the path into the space without altering its horizontal/vertical scale ratio; if false, it will distort the path to fill the specified ratio both horizontally and vertically |
justificationType | if the proportions are preserved, the resultant path may be smaller than the available rectangle, so this describes how it should be positioned within the space. |
bool juce::Path::intersectsLine | ( | Line< float > | line, |
float | tolerance = defaultToleranceForTesting |
||
) | const |
Checks whether a line crosses the path.
This will return positive if the line crosses any of the paths constituent lines or curves. It doesn't take into account whether the line is inside or outside the path, or whether the path is open or closed.
The tolerance parameter is the maximum error allowed when flattening the path, so this method could return a false positive when your point is up to this distance outside the path's boundary.
|
noexcept |
Returns true if the path doesn't contain any lines or curves.
|
inline |
Returns the flag that indicates whether the path should use a non-zero winding rule.
The default for a new path is true.
Adds a line from the shape's last position to a new end-point.
This will connect the end-point of the last line or curve that was added to a new point, using a straight line.
See the class description for an example of how to add lines and curves to a path.
Adds a line from the shape's last position to a new end-point.
This will connect the end-point of the last line or curve that was added to a new point, using a straight line.
See the class description for an example of how to add lines and curves to a path.
void juce::Path::loadPathFromData | ( | const void * | data, |
size_t | numberOfBytes | ||
) |
Loads a stored path from a block of data.
This is similar to loadPathFromStream(), but just reads from a block of data. Useful if you're including stored shapes in your code as a block of static data.
void juce::Path::loadPathFromStream | ( | InputStream & | source | ) |
Loads a stored path from a data stream.
The data in the stream must have been written using writePathToStream().
Note that this will append the stored path to whatever is currently in this path, so you might need to call clear() beforehand.
void juce::Path::preallocateSpace | ( | int | numExtraCoordsToMakeSpaceFor | ) |
Preallocates enough space for adding the given number of coordinates to the path.
If you're about to add a large number of lines or curves to the path, it can make the task much more efficient to call this first and avoid costly reallocations as the structure grows. The actual value to pass is a bit tricky to calculate because the space required depends on what you're adding - e.g. each lineTo() or startNewSubPath() will require 3 coords (x, y and a type marker). Each quadraticTo() will need 5, and a cubicTo() will require 7. Closing a sub-path will require 1.
void juce::Path::quadraticTo | ( | float | controlPointX, |
float | controlPointY, | ||
float | endPointX, | ||
float | endPointY | ||
) |
Adds a quadratic bezier curve from the shape's last position to a new position.
This will connect the end-point of the last line or curve that was added to a new point, using a quadratic spline with one control-point.
See the class description for an example of how to add lines and curves to a path.
Adds a quadratic bezier curve from the shape's last position to a new position.
This will connect the end-point of the last line or curve that was added to a new point, using a quadratic spline with one control-point.
See the class description for an example of how to add lines and curves to a path.
void juce::Path::restoreFromString | ( | StringRef | stringVersion | ) |
Restores this path from a string that was created with the toString() method.
|
noexcept |
Rescales this path to make it fit neatly into a given space.
This is effectively a quick way of calling applyTransform (getTransformToScaleToFit (x, y, w, h, preserveProportions))
x | the x position of the rectangle to fit the path inside |
y | the y position of the rectangle to fit the path inside |
width | the width of the rectangle to fit the path inside |
height | the height of the rectangle to fit the path inside |
preserveProportions | if true, it will fit the path into the space without altering its horizontal/vertical scale ratio; if false, it will distort the path to fill the specified ratio both horizontally and vertically |
|
noexcept |
Changes the winding-rule to be used when filling the path.
If set to true (which is the default), then the path uses a non-zero-winding rule to determine which points are inside the path. If set to false, it uses an alternate-winding rule.
The winding-rule comes into play when areas of the shape overlap other areas, and determines whether the overlapping regions are considered to be inside or outside.
Changing this value just sets a flag - it doesn't affect the contents of the path.
Begins a new subpath with a given starting position.
This will move the path's current position to the coordinates passed in and make it ready to draw lines or curves starting from this position.
After adding whatever lines and curves are needed, you can either close the current sub-path using closeSubPath() or call startNewSubPath() to move to a new sub-path, leaving the old one open-ended.
Begins a new subpath with a given starting position.
This will move the path's current position to the coordinates passed in and make it ready to draw lines or curves starting from this position.
After adding whatever lines and curves are needed, you can either close the current sub-path using closeSubPath() or call startNewSubPath() to move to a new sub-path, leaving the old one open-ended.
|
noexcept |
Swaps the contents of this path with another one.
The internal data of the two paths is swapped over, so this is much faster than copying it to a temp variable and back.
String juce::Path::toString | ( | ) | const |
Creates a string containing a textual representation of this path.
void juce::Path::writePathToStream | ( | OutputStream & | destination | ) | const |
Stores the path by writing it out to a stream.
After writing out a path, you can reload it using loadPathFromStream().
|
friend |
|
friend |
|
friend |
|
private |
|
staticprivate |
|
staticprivate |
|
static |
|
static |
|
staticprivate |
|
staticprivate |
|
staticprivate |
|
private |